AU E10K - Remote Lock Setup; Troubleshooting

42
In Case of Loss of Your E10K
In Case of Loss of Your E10K
The Remote Ctrl Lock allows you to remotely activate the
Auto Lock, and Address Book Lock, preventing others from
using your cell phone.
Setting Conditions for Activating
the Remote Ctrl Lock
You can activate the Remote Ctrl Lock by calling your E10K
a set number of times from a registered phone number
within a specified period of time.
When the standby screen is displayed, press c.
Use ➡ a to select Set Functions and then press
c (Select).
Use ➡ j to select Priv/Restrict and then press
c (Select).
Use ➡ j to select Security Lock and then press
c (Select).
Use ➡ j to select Remote Lock and then press
c (Select).
Enter Lock No., and then press ➡ c (OK).
Use ➡ j to select ON/OFF Setup and then press
c (Select).
Use ➡ j to select ON and then press c (OK).
Use ➡ j to select Caller No.List and then press
c (Select).
Use ➡ j to select 00 and then press c (Edit).
Use ➡ j to select Input Phone No., press
c (Select), enter a phone number, and then
press c (OK).
Press ➡ & (Back).
Use ➡ j to select Set T
ime and then press
c (Select).
Enter a time and then press ➡ c (OK).
This sets the time limit for receiving the set number of •
calls after the first call is received.
You can set a time from one to ten minutes.•
Use ➡ j to select No. of Calls, and then press
c (Select).
Enter a number of calls, and then press ➡
c (OK).
This sets the number of calls to receive to activate the •
Remote Ctrl Lock.
You can set a number of calls from five to ten.•