AUDAC IMEO2 User Manual

IMEO2 - User manual 015
SERV ICE ON LY
HDMI AR C
OPTICALCOAXIAL AUXSERV ICE ON LY
HDMI AR C
OPTICALCOAXIAL AUX
Using the HDMI (ARC) socket
The ARC (Audio Return Channel) function allows you to send
audio from your ARC compliant TV to your sound bar through
a single HDMI link. To enjoy the ARC function, please ensure
your TV is both HDMI CEC and ARC compliant and set up
accordingly.
When correctly set up, you can use your TV remote control to
adjust the volume output (VOL +/- and MUTE) of the sound
bar. - Connect the HDMI cable (not included) from unit’s
HDMI (ARC) socket to the HDMI (ARC) socket on your ARC
compliant TV. Then press the remote control to select HDMI
ARC mode.
Using the optical socket
The optical socket allows connection of the sound bar to the
optical output of your TV or receiver. Simply connect using
an optical (Toslink) cable. Remove the protective cap before
connecting.
Using the coaxial socket
The coaxial socket allows connection of the soundbar to the
coaxial output of your TV or receiver. Simply connect using
a 75 Ohm coaxial cable
Chapter 4
Connecting
Your TV must support the HDMI-CEC and ARC and the HDMI-CEC and ARC must be set to On.
The setting method of HDMI-CEC and ARC may differ depending on the TV. For details about ARC
function, please refer to the owner’s manual.
Ensure that you use an HDMI cables that can support the ARC function.
HDMI-CEC will be called different names by various manufacturers – please refer to your owner’s
manual for details on setting up HDMI-CEC and ARC.
NOTE
SERV ICE ON LY
HDMI AR C
OPTICALCOAXIAL AUX
SERV ICE ON LY
HDMI AR C
OPTICALCOAXIAL AUX

AUDAC IMEO2 Specifications

General

Brand	AUDAC
Model	IMEO2
Category	Speaker System
Language	English