Audatex VHC2 - Delete a Report; Setting up Company details

Service Desk: 0118 923 5645
For the integration to work
• The VRM that you saved the report with must match an Assessment within your
Audatex Company. (Upper Case, Lower Case and Spaces are ignored).
• This Assessment must have been in an active state within the past 60 days.
• You must have an internet connection.
(If no internet connection is available when carrying out the diagnostic check then
the report will be shared once a valid connection is made).
To sign up for AEG Integration please contact your Audatex Account Manager.
4.3.3 Delete a Report
Select the report/s that you wish to delete by pressing and holding down on the le
name. You are able to select more than one report or select all.
Once you have selected the report/s that you wish to delete, select the Delete icon
from the bottom of the screen.
NOTE: Once deleted, it is possible to retrieve the report by going to the History Menu
- see section 4.2.5.
4.3.4 Setting up Company details
11 12
From the VHC2
Dashboard select the
‘Diagnostics’ icon
Within settings select
‘Print Information’
Here you can input the
below to show on your
VHC2 reports:
• Company logo
• Company name
• Address
• Contact details
Select the
‘Menu’ icon, scroll down
and select ‘Settings’
Select ‘Save’ and the
details will then appear on
all future reports.
To edit any details just
repeat the procedure