1. VHC2 Overview
1.1 Supplied Equipment
Your VHC2 unit is supplied with the following supporting equipment:
• Charging dock
• USB cable
• Mains Adapter
• VCI – Vehicle Communications Interface
• Ethernet Adapter
1.1.1 VCI – Vehicle Communications Interface
Your VCI (Vehicle Communications Interface) is linked to you VHC2 unit. The VCI is
connected to the VHC2 using a Bluetooth connection giving you the ability to work
from any part of the car, unrestricted by the length of traditional cabling.
The VCI plugs into the vehicles EOBD port.
(For further information on EOBD port locations see 4.2.2)
NOTE: The VCI will only work with its partnered VHC2 and not with any other unit.
If you experience any issues with the VCI please contact the VHC2 support team,
on 0118 923 5645.
To Next Page
Loading...