-
W a rm a nd c old
--------------------
Button (s)
!AUTO)
88
(left and right)
§)
!ECON]
!OFF)
88
!in the center)
Fun cti o n
Automatic operation
Temperature controls for
driver's side and passenger side
Air recirculation
Switches off air conditioning
Switches off air conditioning (rather than using
@a)
Switches off the air reci rculation (rather than
using
I O FF])
Adjusts fan speed
Air directed to the windows
Air directed to the footwells
Air from dashboard outlets
Windshie ld defroster/defogger
Rear window defroste r/defogger
The buttons
I-OJ, IEJJ, and j-0,,J can be selected individually or in
combination . •
Automatic mode [AU TO]
The automatic mode is the standard setting for all
seasons.
Swit c hing on AUTO
- Set the temperature between 64 °F (+18 °C) and 86 °F
(+29 °C).
- Press [AUTO
I=> page 111, fig . 130.
AUTO on ly works when you set the inside temperature between
64 °F (18 °C) and 86 °F (29 °Cl. If you select a temperature below
64 °F (18 °C),
LO will appear in the display. If you select a tempera-
ture above 86 °F (29 °C),
HI wi ll appear in the display.
The system automatically compensates for changes in outside
temperature and for the intens ity of the sunlight.
[ i ] Tips
By keeping the !AUTO l button on the driver's side pressed for
severa l seconds, the temperature of the passenger side can be set
t o the tempera ture of the driver's side or vice versa . The new
temperature setting will be shown in the disp lay. •
Setting the temperature
Separate temperatures can be selected for the driver's
and front passenger side.
- Press the(:) button or t he G button under each display
=> page 111, fig. 130 until the desired temperature is
reached.
The selected temperature setting appears in the display above the
buttons .
By pressing both
!AUTO l buttons for severa l seconds, the tempera-
ture on the passenger side can be set to the temperature of the
driver's side or vice versa . The new temperature setting will be
shown in the display. The old temperature setting can be restored
by resett ing the display as required . •
To Next Page
Loading...
