90
Actuator test
The actuator tests listed in the table can be called
up using the guided fault-finding function in the
diagnosis tester. Most of these can be activated
selectively (individually).
Possible actuator tests
Infotainment
Adaptation channel Designation
128 Basic audio volume
129 Mobile after-run time, from 30 seconds to 30 minutes in seven intervals
130 Reference channel wait time for synchronisation with audio components
131 Microphone-sensitivity
133 Bluetooth on/off
134 Bluetooth: Handsfree operation only with mobile phone inserted
135 Change Bluetooth PIN
136 Beep Delay value: Time gap between pressing button and acknowledgement beep
Mobile baseplate adaptation
No. Designation Actuator test
Sequential Selective
1 "Phone on" signal X X
2 Audio lead adapter set X
3 Communication lead to adapter set X
To Next Page
Loading...
