Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
♦ Spark plug socket and extension - 3122B-
♦ Puller - T10094 A-
♦ Torque wrench - V.A.G 1331- , measuring range 6 to 50 Nm
♦ Or: torque wrench - VAS 6583- , measuring range 3 to 60 Nm
♦ Or: torque wrench - VAS 5820- , measuring range 20 to 100
Nm
Table of tightening torques for installation:
Component/fastener [Nm]
Spark plugs 30
Removal steps:
– Remove engine cover panel ⇒ page 15 .
– Remove intake manifolds ⇒ 12-cylinder direct petrol injection
engine (6.3 ltr. 4-valve); Rep. gr. 24 ; Intake manifolds; Re‐
moving and installing intake manifolds .
Audi A8 2010 ➤
Maintenance - Edition 11.2014
98 3. Maintenance
To Next Page
Loading...
