Audi A8 2010 - Engine Cover Panel: Removing and Installing

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
2.2 Engine cover panel: removing and in‐
stalling
4-cyl. petrol engine 2.0 ltr. TFSI hybrid ⇒ page 15
6-cyl. petrol engine 2.5 ltr. FSI ⇒ page 15
6-cyl. petrol engine 3.0 ltr. TFSI (version 1) ⇒ page 16
6-cyl. petrol engine 3.0 ltr. TFSI (version 2) ⇒ page 16
8-cyl. petrol engine 4.0 ltr. TFSI ⇒ page 16
8-cyl. petrol engine 4.2 ltr. FSI ⇒ page 17
12-cyl. petrol engine 6.3 ltr. FSI ⇒ page 17
6-cyl. diesel engine 3.0 ltr. TDI (version 1) ⇒ page 17
6-cyl. diesel engine 3.0 ltr. TDI (version 2) ⇒ page 18
8-cyl. diesel engine 4.2 ltr. TDI ⇒ page 18
2.2.1 4-cyl. petrol engine 2.0 ltr. TFSI hybrid
Procedure for removing:
– Carefully pull engine cover panel off retaining pins one after
another -arrows-.
Procedure for installing:
– Position engine cover panel on retaining pins and then use
your hands to press it onto retaining pins, one after the other.
2.2.2 6-cyl. petrol engine 2.5 ltr. FSI
Procedure for removing:
– Carefully pull engine cover panel off retaining pins one after
another -arrows-.
Procedure for installing:
– Position engine cover panel on retaining pins and then use
your hands to press it onto retaining pins, one after the other.
Audi A8 2010 ➤
Maintenance - Edition 11.2014
2. Preparations 15