Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
1 - Breather connection for re‐
ducing agent container
2 - Union nut for reducing
agent container
3 - Cut-off valve for breather
line
4 - Quick-release coupling on
breather line
5 - Filler line
6 - Cut-off valve for filler line
7 - Union nut for tank filler neck
8 - Breather line
Procedure:
– Open tank flap and unscrew filler cap for reducing agent tank.
– Clean filler neck of tank for reducing agent with a lint-free cot‐
ton cloth soaked with water.
– Close cut-off valves of breather and filler lines of filling device
for AdBlue - VAS 6542- .
– Apply filling device for AdBlue - VAS 6542- to reducing agent
container (see Electronic parts catalogue, ETKA) and screw it
on as far as stop.
Audi A8 2010 ➤
Maintenance - Edition 11.2014
3. Maintenance 129
To Next Page
Loading...
