Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Removal steps:
– Remove noise insulation ⇒ page 18 .
Procedure:
– Apply adapter - T40058- to crankshaft vibration damper (see
-illustration-).
– Turn poly V-belt clockwise using reversible ratchet and adapt‐
er - T40058- , and check pulley for air conditioner compressor
-3- and entire belt. Look for the following types of damage:
Audi A8 2010 ➤
Maintenance - Edition 11.2014
84 3. Maintenance
To Next Page
Loading...
