Audi A8 D5 - Overview of Rivets and Tools

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
D 1 + D 2 - Pressing out ∅ 3.2
mm punch rivet
D 2 + D 3 - Pressing out ∅ 3.2
mm punch rivet
D 2 + D 5 - Pressing out ∅ 5
mm punch rivet
D 3 + D 5 - Pressing out ∅ 5
mm punch rivet
D 4 + D 5 - Pressing out ∅ 5
mm punch rivet
D 5 + D 12 - Punching ∅ 8 mm
hole for weld joint
D 6 + D 7 - Punching and coun‐
tersinking hole for ∅ 4.8 mm
pop rivet
D 8 + D 8 - Re-forming metal
panel
D 8 + D 9 - Setting ∅ 4 mm
solid rivet
D 10 + D 11 - Punching and
countersinking hole for ∅ 4
mm solid rivet
D 13 + D 14 - Pressing out ∅
5.3 x 7.5 mm punch rivet
D 17 + D 17 - Re-forming metal
panel
D 15 + D 16 - Punching and
countersinking hole for ∅ 6.0
mm solid rivet
D 17 + D 17 - Setting ∅ 6.0 mm
solid rivet
S 1 + D 2 - Pressing out ∅ 3.2 mm punch rivet
S 2 + S 3 - Inserting and setting ∅ 3.2 mm punch rivet
S 4 + D 5 - Pressing out ∅ 5.3 x 5.5 mm punch rivet
S 5 + D 5 - Pressing out ∅ 5.3 x 6.5 mm punch rivet
S 6 + S 7 - Inserting and setting ∅ 5.3 x 5.5 mm punch rivet
S 6 + S 8 - Inserting and setting ∅ 5.3 x 6.5 mm punch rivet
7.4 Overview of rivets and tools
⇒ Rep. gr. 00 ; Safety precautions
General InformationBody Repairs, General Body Repairs - Edition 04.2018
38 7. Cold joining techniques