Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Note
Depending on the type of cavity for which sealing work is per‐
formed, drying may take several days. Adequate ventilation must
be ensured during the drying process.
Caution
♦ Functional components such as brake systems and ex‐
haust systems must not be treated.
♦ Rubber and plastic components should also not be trea‐
ted.
Cleaning
♦ Anti-corrosion agents can be wiped off easily.
♦ Plastic cleaners are suitable for cleaning off dried-on materi‐
als.
♦ Cleaning with a steam cleaner is possible for larger surfaces.
Any spray on painted surfaces should be removed immedi‐
ately.
General InformationBody Repairs, General Body Repairs - Edition 04.2018
11. Corrosion protection 57
To Next Page
Loading...
