Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Crater
Compound break
Star and crack
13.1.2 Description of repair work
For details of the repair procedure, refer to the instructions in the
repair kits approved in the workshop equipment catalogue.
♦ Repairs must be performed in an area protected from direct
sunlight.
♦ The repair area must be around room temperature.
♦ The work area must be protected from moisture.
Note
♦
The vehicle can be used again immediately as soon as the
repair work has been completed.
♦
Depending on the type of damage, there is a possibility that
some traces of the damage will remain. However, this does
not have any bearing on the success of the repair job.
♦
Once the repair is completed, the windscreen can be subjec‐
ted to normal loads. The injected and hardened synthetic resin
ensures that the crack will not spread any further. The hard‐
ened resin is colourless and has the same refractive index as
the windscreen glass.
General InformationBody Repairs, General Body Repairs - Edition 04.2018
13. Glass repairs 67
To Next Page
Loading...
