Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Installing
– Match up outer wheel housing and fix in position.
– Check fit relative to side panel.
– Rivet in new part using rechargeable riveter -VAS 5279A- .
– Alternatively, joint can also be welded using shielded arc weld‐
ing equipment : SG continuous seam (staggered - with gaps).
Audi A8 2003 ➤
Body Repairs - Edition 05.2011
4. Side panel - Renewal 121
To Next Page
Loading...
