Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Remove small punch rivets. Use rechargeable riveter -VAS
5279A- with attachments S1 and D2 from -VAS 5279/2 - or
rechargeable riveter -VAS 5279B- with attachments S1 and
D2 .
– Remove remaining material using compact angle grinder -
VAS 5167- .
Replacement parts
♦ Roof
♦ Solid rivets
♦ 2-component epoxy adhesive -DA 180 A00 A2-
♦ Silicone remover -LSE 020 100 A3-
♦ Applicator -D 009 500 25 -
♦ Aluminium primer -DA 009 801 -
♦ Silicate stone -DA 009 800 -
Preparing joints for adhesive application
– Clean bonding area with silicone remover - LSE 020 100 A3- .
Audi A8 2003 ➤
Body Repairs - Edition 05.2011
52 Rep. gr.51 - Body - centre
To Next Page
Loading...
