Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Prepare bonding area with silicate stone -DA 009 800 - and
clean.
– Apply aluminium primer -DA 009 801 - to bonding surfaces
using applicator -D 009 500 25 - .
– Apply 2-component epoxy adhesive -DA 180 A00 A2- (two
cartridge sets) to entire riveting area using double cartridge
gun -VAS 6453- .
Welding in
Match up roof and fix in place.
– Weld in roof using shielded arc welding equipment 250A : SG
continuous seam (staggered - with gaps).
Riveting in
Note
♦
Use clamps.
♦
Rivet in roof using rechargeable riveter -VAS 5279 B- .
Audi A8 2003 ➤
Body Repairs - Edition 05.2011
1. Roof - Renewal 53
To Next Page
Loading...
