• .___ P_ a_r_k_i_n..:g::;....s_y=--s_t_e_m __________________________________________________ _
W ar nin g t o n es
• Front volum e - front sensor volume
• Front frequen cy - front sensor fr equ ency
• Rear volume - rear sensor volume
• Rear frequ ency - rear sensor frequency
• In-car entertainme nt fader - when the parking system is
switched on, the vo lume of the active audio source is lowered.
The newly adjusted value is br iefly heard from the signal generator.
[ i ] Tips
• The warning tones can also be adjusted directly by the visual
display or the picture from the rear view cam era. Simply press the
Sett ings contro l button.
• Changed settings are activated when parking system is switched
on again.
• The settings are automat ically stored and assigned to the remote
control key. •
Applies to vehicles: w ith par king system advanc ed and trail er hi tch
Trailer hitch
For vehicles with a factory insta lled trai ler hitch, or a trai ler hitch
installed according to factory specifications, the parking system
rear sensors do not come on whenever you shift into reverse gear
or when you press the
P"1A switch . Remember, there is no warning for
distances to the rear. The front sensors remain activated . The visual
display switches to the trailer towing mode . The picture from the
rear view camera will not show the orientation lines nor the blue
surfaces .
If you install a hitch yourself, this function may not work . •
App lies to veh icles: w ith par king system advanced
Error messages
There is an error in the system if the LED on the P"1A switch is blinking
and you hear a continuous alarm for a few seconds aft er switching
on the parki ng system o r when the parking system is already acti -
vated . Have you r authorized Audi dea ler correct the error .
[ i ] Tips
If the error is not corrected before you switch off the ignition , when
you switch on the parking system again, the LED in the P'
1
1Jl switch
wil l blink . •
To Next Page
Loading...
