Seat memory
Appl ies to vehicles: w ith seat memory
Memory for driver's seat
The seat adjustment settings for two drivers con be stored
using the memory buttons in the driver's door.
Fig. 70 Driver's door:
Seat memory
In addition to the setting for the driver's seat, the exterior rear view
mirror setting can be stored and recalled through seat memory if
the vehicle is properly equipped.
Storing and recalling settings
With the help of the memory buttons 1 and 2 => fig. 70 the settings
for two different drivers can be stored and recalled=> page 73.
The current settings are also automatically stored on the remote
control key being used when the vehicle is locked. When the vehicle
is unlocked, the settings stored on the remote control key being
used are automatically recalled.
Turning seat memory on and off
If the
I OFF] switch is depressed, the seat memory is inoperative.
When the Memory function is off, the LED in the button lights up.
All the stored settings are retained. We recommend using the
I OFF]
switch and deactivating the seat memory if the vehicle is only going
Cont rols and equip-
ment
Seats and storage
to be used temporarily by a driver whose settings are not go ing to
be stored. •
App li es to veh icles: w ith seat memory
Storing and recalling settings
Storing settings
Adjust the driver's seat.
Adjust the two exterior mirrors.
Press the
(SET] button. The light in the button will come
on.
Now press a memory button ((Dor@]). If the storing
procedure is correct, a confirmation tone will sound.
Recalling settings
If the driver's door is open, tap the corresponding
memory button briefly.
If the driver's door is closed, press the appropriate
memory button until the stored position is reached.
Successful storage is confirmed audibly and by the light in the I SET]
button illuminating=> fig. 70.
When the vehicle is
locked, the current settings are stored and
assigned to the remote control key. But the settings stored on
memory buttons 1 to 2 are not deleted. They can be recalled at any
time. When the vehicle is
unlocked, the settings stored on the
remote control key are restored.
If your vehicle is driven by other persons using your remote control
key, you should save your individual seat position on one of the
memory buttons. You can recall your settings again simply and
conveniently by pressing the corresponding memory button. When ..,
Vehicle care
I I
irechnical data
To Next Page
Loading...
