Appli es to vehicles: wit h digital compass
Setting the magnetic deflection zone
The correct magnetic deflection zone must be set in order
to display the directions correctly .
/
@
®
Fig. 68 North America: magnetic deflection zone boundaries
- Hold the @ => fig. 67 button down until the number of
the set magnetic deflection zone appears on the interior
. .
rear view m irror.
- Adjust the magnetic deflection zone by repeatedly
pressing on the @ button.The set mode automatically
deactivates after a few seconds. •
Cont rols and equip-
ment
Ap pli es to vehi cles: with dig ita l compass
Calibrating the compass
Clear vision
The compass has to be recalibrated if the display is wrong
or inaccurate.
Hold the @ button down until the letter C is displayed on
the interior rear view mirror.
Drive in a circle at a speed of about 5 mph (10 km/h) until
a direction is shown on the interior rear view mirror.
& WARNING
The digital compass is to be used as a directional aid only. Even
though you may want to look at it while you are driving, you must
still pay attention to traffic, road and weather conditions as well
as other possible hazards. •
Vehicle care
I I
irechnical data
To Next Page
