EasyManua.ls Logo

Audi Q5 2011 - Driver Information

Audi Q5 2011
312 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
104 Ad a pti v e crui se control
your vehicle's acceleration and braking can
range from dynamic (1) to comfortable (5).
I Driving
dynamic standard comfort
program
Distance 1 1 2 3
Distance 2
2
3
4
Distance 3
2 3 4
Distance 4 3 4
5
.&_ WARNING
When setting the distance, the driver is re-
sponsible f or adhering to the respective
national and country-specific regulations .
- Follow ing other vehicles too closely in-
creases the risk of collisions and serious
personal injury .
- Setting short distances to the traffic
ahead reduces the time and distance
available to br ing your vehicle to a safe
stop and makes it even more necessary
to pay close attention to traffic.
-Always use good judgment and select a
safe following distance for the traffic,
road and weather condit ions.
(D Tips
The distance setting is reset to the factory
default
DISTANCE 3 the next time the ig-
nition is turned on.
Driver information
Displays in the instrument cluster
Applies to vehicles: wit h adaptive cruise contro l
Depending on the driving situation, driver in-
formation is displayed in the instrument clus-
ter.
Fig. 1 18 Overview instr ument cluster
@ Speedometer and indicat or light display
@ Display in the instrument cluster
© Message in the instrument cluster display
@ Speedometer and indicato r light
display
Important information concerning vehicle op-
eration with adaptive cruise control is shown
in display area @ . The desired speed you set is
indicated in the speedometer (LED lights
around the edge).
The indicator lights show whether the system
has detected a vehicle trave li ng ahead.
@ Display in the instrument cluster
In disp lay area @ informat ion from the navi-
gation system* and t he tr ip comp uter is dis-
played in addition to information about adap-
tive cruise control.
You can select among the different informa -
tion by repeated brief taps on the
I RESET I but-
ton on the windshie ld wiper lever
c:> page 24,
Operation.
© Status indicator
The information in area © is not disp layed
permanent ly. Information is displayed on ly if
you set or change the speed setting, change .,..

Table of Contents

Related product manuals