.. Press the I RESET I button @ c::> page 24,
fig. 17 repeatedly until the efficiency pro-
gram appears in the display.
The efficiency program can help you to use
less fuel. It evaluates driving information in
reference to fuel consumption and shows oth-
er equipment influencing consumption. Fuel
economy messages
c::> page 25 provide tips
for efficient driving.
The efficiency program uses distance and con-
sumption data from trip computer 1. If the
data are deleted in the efficiency program,
those values are also reset in trip computer
1.
Other equipment
Applies to vehicles: with efficiency program
Fig. 19 Display : oth er equ ipmen t
.. In the efficiency program, press the function
selection switch
c::> page 24, fig. 17 @ re-
peatedly until the other equipment appears
in the display.
Other equipment that is currently affecting
fuel consumption is listed in the efficiency
program . The display shows up to three other
items of equipment @ . The equipment using
the most fuel is listed first . If more than three
items using fuel are switched on, the equ ip-
ment that is currently using the most fuel is
displayed.
A scale @ also shows the current total con-
sumpt ion of all other equ ipment.
Driver information display 25
Fuel economy messages
Applies to vehicles: with efficiency program
Fig. 20 Display : fuel econo my message
Fuel economy messages are displayed when
fuel consumption is increased by certain con-
dit ions . If you follow these fuel economy mes-
sages, you can reduce your vehicle's consump-
t ion of fuel. The messages appea r automat i-
cally and are only displayed in the efficiency
program. The fuel economy messages turn
off
automat ically after a certa in period of t ime .
.. To turn a fuel economy message
off immedi-
ately after it appears, press the
I RESET ! but-
ton
c::> page 24, fig. 17 @ , or
.,. Press the function select ion switch
c::> page 24, fig. 17 @ .
(j} Tips
- Once you have turned a fuel economy
message off, it will only appear again af"
ter you turn the ignition on again.
- The fuel economy messages are not dis-
played in every instance, but rather in in-
tervals over a period of time.
On-Board Diagnostic
system (OBD)
Malfunction Indicator Lamp (MIL)
The Malfunction Indicator Lamp (MIL)¢• in
the instrument cluster
c::> page 14, fig. 8 is
part of the On-Board Diagnostic (OBD
II) sys-
tem.
The warning/indicator light illuminates when
the ignition is switched on and goes out after
the engine starts and the idle has stabilized.
Ill>
To Next Page
Loading...
