Instruments and warning/indicator lights 13
Odometer
The odometer indicates the distance driven.
Fig. 6 In st rum ent clust er: odometer
Fig. 7 Instrument cluster : reset button
The display of distance driven is shown in kilo-
meters "km " or in "miles ".
- USA models - Miles
- Canada models - Kilometer s
You can switch from kilometers to miles or
vise ve rsa in t he radio or in t he MMI* using the
ISETUP I button .
Odometer/trip odometer
The odometer shows the total number of kilo-
meters or miles that have been driven on the
vehicle.
The trip odometer shows the distance driven
since it was last reset . It can be used to meas-
ure short distances . The last digit shows dis-
tances of 100 meters or 1/10 of a mile .
The trip odometer can be reset to zero by
pressing the reset button
10.01
~
fig. 7.
Malfunction message
If there is a malfunction somewhere in the in-
strument cluster, dEF will appear in the trip
odometer and will stay on. Contact your au-
thorized Audi dealer to have the problem cor-
rected.
(D Tips
- The date, time, and distance continue to
show for about 30 seconds after the igni-
tion is switched off.
- The odometer turns on for about 30 sec -
onds when the driver's door is opened.
- The odometer can be turned on for ap-
proximately 30 seconds with the ignition
off by pressing the
!SET ! button
~ page 11, fig. 4.
To Next Page
Loading...
