M
N
0
..J
'SI:
,....,
\!)
..,.,
,....,
..,.,
,....,
@ Tips
- The tire pressure monitoring system may
stop working when there is an ESC mal-
funct ion.
- Using snow chains may result in a system
malfunction.
- The tire pressure monitoring system on
your Audi was developed using t ires with
the "AO" or "RO" identification on the
tire sidewall
c:> page 291. We recom-
mend using these t ires.
Reset tire pressure monitoring system
If the tire pressure is adjusted, wheels are ro-
tated or changed, the TPMS must be reset via
MMI.
.. Before stor ing the new tire pressures, check
t hat the current pressures on all four t ires
correspond to the specified values and
adapt the pressures to the current load
c:>page 278 .
.. Switch on the igni t ion .
.. Select:
ICARI f unct ion but t on > System s*
control button > Tire pressure monitoring >
Store now. Or
.. Select:
ICARI f unction button> Car systems*
control button > Servicing & checks > Tire
pressure monito ring > Store tire pressures
> Yes, store now .
(D Tips
Do not store the t ire pressure if there are
snow chains on the tire. Otherwise, a sys-
tem malf unction may occur.
Tire s an d wheel s 303
•
•
To Next Page
Loading...
Need help?
General
