"'
"'
....
N
"
N
....
0
0
Vl
'<f
- Switching online traffic information on: press
the right control button and switch
Online traf-
fic data
on(~). The IONLINE I symbol is shown
in the Infotainment system display @
<=>fig . 116.
- Switching traffic map view on: for an optimal
view of traff ic information, se lect :
I NAV/MAPI
button > right control button > Map settings >
Map display > Traffic .
You can also display the online traffic informa -
tion
in the online map view <=>page 139 or in the
standard map view
<=>page 136, fig. 112.
Traffic information display
Color-coded markings along the route indicate
the traffic flow @ <=>
fig. 116:
Green: traffic is flowing freely
Red: congest ion
Orange: stop-and-go traffic
Shaded markings indicate the length of the area
with congestion.
Colored warning symbols: there is a traffic inci-
dent immediate ly ahead on the route.
Grayed out warning symbols: traffic incidents
that are not on your route.
Red warning symbol: all warning symbols will be
red when route guidance is not active.
The display of colored markings, warning sym-
bols, etc . can be set in the
Map content menu
<=> page 138
Traffic information is switched on at the factory.
You can switch off the reception of on line traffic
information at any time<=>
page 140.
(D Tips
- Online traff ic information is not available in
Canada.
- Always read the chapter
r:!) page 125, About
Audi connect.
Navigation
- Every vehicle with the Online traffic data
function switched on has the most accurate
repo rts of traff ic situat ions as well as traffic
forecasting. Your vehicle transmits and
processes its anonymous, encrypted posi-
tion information at regular intervals to the
traffic data provider. In case you do not
want to use this, you can switch off the
On-
line traffic information
function at any
time.
- The online traffic information network is
still currently not available in all countries,
nor is the coverage nationwide. Additional
information can be found at
www.audiusa.com/audiconnect .
Better route
By receiving traffic information through TMC,
your MMI calculates o better route - if available -
and the possible time saved for the current route
guidance. You con decide yourself which route
you would like to use.
.. Press the !NAV/MAPI button repeatedly unti l
the map is displayed.
Requirement:
Route guidance must be active.
If your MMI has calculated a better route than
the current route guidance, the message
A better
route is available .
appears on the map along
with the time that may be saved . A better route
is indicated in the map view by the symbol te.
Accept better route
Requirement: the te symbol must be shown on
the map .
- Press the right control button.
- Select and confirm the better route.
- The better route is used for t he remaining
route guidance and the route is recalculated .
141
To Next Page
Loading...
