Parking systems
Adjusting the display
and the warning tones
The display and warning tones can be adjusted in
the Infotainment.
""Select in the Infotainment system: IMENU I but-
ton
>Ve hicle > left control button >Driver as-
sistance > Parking aid.
Warning tones
Front volume - volume for the front area
Rear volume - volume for the rear area
Entertainment fader - when the parking system
is turned on, the volume of the audio/video
source is lowered.
The newly selected level is demonstrated briefly
by the sound generator.
(D Tips
The settings are automatically stored and as-
signed to the remote control key that is in
use.
Error messages
Front parking aid: malfunct ion! Obstacles can-
not be detected
Parking aid: malfunction! Obstacles cannot be
detected
There is a system malfunction if the LED in the
Pw, button blinks when sw itching on the system.
If the error is not corrected before you switch off
the ignition, the LED in the
Pwi button will blink
the next time you switch on the parking system
by shifting into reverse. As long as the error is ac-
tive, you can display the e rror messages in the
second tab of the drive r information system.
Parking system plus*
If a sensor or speaker is faulty, the!¾: symbol
will appear in front of/behind the vehicle in the
Infotainment display. If a rear sensor is faulty,
only obstacles that are in areas (!) and @
c::> page 77, fig. 70 are shown. If a front sensor is
fau lty, only obstacles that are in areas @ and @)
are shown .
80
Drive to an authorized Audi dealer or authorized
Audi Service Facility immediate ly to have the
malfunction corrected.
To Next Page
Loading...
