Need help?Do you have a question about the Audi R8 LMS 2018 and is the answer not in the manual?
General| Brand | Audi |
|---|---|
| Model | R8 LMS 2018 |
| Category | Automobile |
| Language | English |
Provides context on the R8 LMS Generation II handbook and its scope.
Details the operation, safety, and maintenance of the air jack system.
Information on using car lifting systems with the air jack.
Recommended methods and points for lifting the car safely.
Overview and technical data of the FIA-homologated fire extinguisher.
Procedures for checking the fire extinguishing system components.
Instructions on how to activate the fire extinguisher system.
Guide for replacing the battery in the control unit.
Details on service intervals for the extinguisher reservoir and detonator.
Guidelines for mounting and aligning extinguisher system components.
Technical data and filling quantities for the drivetrain.
Specifications and fluid capacities for the engine.
Service intervals and components for engine maintenance.
Details on the recommended engine oil and part number.
Procedure for checking and measuring the engine oil level.
Steps for filling the engine oil when the system is empty.
Guidance on replenishing engine oil during a race.
Information on using an accessory for adding oil during a race.
Details on the thermostat's opening temperatures.
Information on coolant capacity and recommended additive.
Procedure for filling the cooling system with coolant.
Lists specific tools needed for cooling system service.
References for clutch service and maintenance.
Step-by-step guide for bleeding the clutch system.
General section for fuel cell components.
Detailed instructions for servicing the refuelling valve.
Instructions for servicing a specific refuelling coupling type.
Specifications for the gearbox type, weight, and ratios.
Recommended gearbox oil and part number for the R8 LMS.
Details on the required oil quantities for the gearbox.
Procedure for checking and measuring the gearbox oil level.
How to inspect gearbox components for wear.
Information on gearbox rebuilds and training courses.
Procedure for adjusting the differential preload.
Step-by-step guide for filling and bleeding the steering system.
Table of various front axle parameters.
Graphs showing camber, toe, and roll center changes with heave.
Graphs showing camber, toe, and roll center changes with heave.
Table of front and rear spring rates and related data.
Information on anti-roll bar drop link lengths and adjustment.
Details on available bump stops and packers for damper adjustment.
Information on adjusting damper lengths for ride height.
Table for adjusting front spring platform for droop travel.
Table for adjusting rear spring platform for droop travel.
Table for setting ride height using front axle pushrods.
Table for setting ride height using rear axle pushrods.
Instructions for adjusting damper compression and rebound.
Graphs showing front and rear damper force vs. speed.
Details on adjusting front axle camber using shims.
Details on adjusting rear axle camber using shims.
Diagrams showing toe rod lengths for zero toe setting.
Tables for toe adjustment based on turns and length changes.
Recommended procedure for bedding brake discs and pads.
Instructions on partially blanking brake cooling ducts.
Overview of pedal box adjustment possibilities for ergonomics.
Procedure for adjusting the longitudinal position of the pedal unit.
Detailed steps for adjusting the sledge longitudinal position.
Lateral position of the pedal plate.
Adjusting the pedal plate laterally for space between pedals.
How to adjust the spring preload on the throttle pedal.
Instructions for adjusting the throttle pedal damper.
Adjusting brake pedal longitudinal position relative to throttle.
Adjusting brake pedal longitudinal position relative to throttle.
Adjusting brake pedal distance to footrest/throttle pedal.
Adjusting brake pedal height and angle for driver comfort.
General information about the Audi PS1 safety seat.
Details on the homologation numbers and validity for the seat.
Information on available sizes for the Audi PS1 seat.
Details on the seat cushions and their safety importance.
Information on FIA-homologated foams for seat inserts.
Options for shoulder strap mounting based on driver size.
Rear wing adjustment range and ISO balance table.
Ride height measurements on floor and chassis reference points.
How to check and adjust the rear wing position using a jig.
Overview of RaceCon software functions for parameterisation.
Procedure for connecting to the car and changing data offline.
Instructions for adapting lap trigger settings in RaceCon.
Steps to reset outing and lap counters via RaceCon.
List of variables requiring recalibration after engine/ECU changes.
Steps to calibrate the throttle pedal position.
Steps to calibrate the clutch pedal positions.
Checking and adjusting the gearbox potentiometer voltage.
Procedure for automatic calibration of the butterflies.
Steps to calibrate the steering angle sensor.
How to change and copy pit speed values.
Overview of diagnostic capabilities and error detection.
Pre-start checks and preparations for the engine.
Procedure for checking and adjusting the gearbox potentiometer.
Detailed procedure for checking the engine oil level.
Procedure for checking the gearbox oil level.
How to check the coolant level in the expansion reservoir.
How to check the coolant level in the expansion reservoir.
Procedure for checking the steering system oil level.
Information on checking brake fluid quality and levels.
Steps for preparing the car before starting the warm-up procedure.
Detailed steps for warming up the engine and gearbox.
Detailed steps for warming up the engine and gearbox.
Detailed steps for cooling down the engine and gearbox.
Contact information for air jack service partners.
Contact information for fire extinguisher system service.
Contact information for engine rebuild services.
Contact information for gearbox rebuild services.
Contact information for damper service providers.
Contact information for suspension link service providers.
Contact information for steering wheel service.
Information on contacting BREMBO for brake caliper service.
Contact information for wheel inspection services.
Contact information for gear shift system service.
Contact information for clutch service providers.
To Next Page
