19
Rev.1.25
• The microphone input terminal of the microphone is a monaural terminal. If a stereo external
microphone is plugged into the microphone input terminal, either the right or the left channel audio
will be transmitted.
• When fine-tuning the volume of an external microphone using this microphone, select [OWN] by
pressing the selector button. For fine tuning, refer to the "Adjusting the volume” on page 15.
• Use a unidirectional microphone. The use of an omnidirectional microphone may cause feedback.
• In addition to this manual, refer to the operating instructions of the external microphone to be
connected.
To Next Page
Loading...
