22
Setting up your PC to work with Audacity
(See Setting up your PC to work with AT-LP2D-USB Turntable on page 4.)
4. Next, select Quality tab at the top.
• Default Sample Rate: 44100 Hz.
•
Default Sample Format: 16-bit.
•
Real-time sample rate converter: Fast Sinc Interpolation.
•
High-quality sample rate converter: High-quality Sinc Interpolation.
•
Real-time dither: None.
•
High-quality dither: Triangle.
•
Select OK to save settings and exit Preferences menu.
5. Next, from the main Audacity window, select the drop-down box (arrow
pointing down) next to the microphone near the middle of your screen.
• If you don't see the drop-down box or the microphone pictured above, return
to Preferences Menu (see step 2, page 21). Select the Interface tab. Check
Enable Meter T
oolbar. This will allow you to see the microphone with the
drop-down box on your main screen.
•
Select Monitor Input from the drop-down menu. NOTE: You will need to
select this setting every time you launch Audacity
. The other settings selected
above will be saved when you exit the program.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
