Need help?Do you have a question about the Audio Technica AT-LP5X and is the answer not in the manual?
Turntable| type | 3-speed, fully manual operation |
|---|---|
| motor | DC servo motor |
| drive method | Direct drive |
| speeds | 33-1/3 RPM, 45 RPM, 78 RPM |
| starting torque | > 1.0 kgf.cm |
Tonearm| type | Static balanced J-shaped tonearm |
|---|---|
| effective length | 247 mm |
| overhang | 17 mm |
| stylus pressure adjustment range | 0 to 4 g |
| applicable cartridge weight range | 15 to 20 g (including headshell) |
Cartridge and Headshell| cartridge model | AT-VM95E |
|---|---|
| cartridge type | VM |
| output voltage | 4.0 mV (1 kHz, 5 cm/sec) |
| tracking force range | 1.8 to 2.2 g (2.0 g standard) |
| headshell weight | 9.3 g (0.33 oz) (including lead wire) |
USB Function| A/D | 16 bit 44.1 kHz or 48 kHz USB selectable |
|---|---|
| computer interface | USB 2.0 Compliant, Windows 7 or above, or MAC OSX or above |
General| power supply requirements | 100 to 240 V, 50/60 Hz, 0.6 A Max. |
|---|---|
| power consumption | 3 W |
| dimensions | 450.0 mm (17.72") × 352.0 mm (13.86") × 157.0 mm (6.18") (W × D × H) |
| weight | 7.3 kg (16.1 lbs) |
Provides critical warnings and cautions for safe operation.
Details FCC compliance and rules for the device.
States compliance with Canadian IC regulations.
Guidelines for positioning and use of the turntable body.
Advice on handling and protecting the cartridge stylus.
Identifies components in the top view of the turntable.
Details components visible from the front and rear of the turntable.
Describes the various parts and adjustments of the tonearm assembly.
Step-by-step guide to installing the platter and rubber mat.
Instructions for ensuring the turntable is level using adjustable feet.
Advice on positioning the turntable to avoid vibrations and interference.
Guide to attaching the headshell and counterweight to the tonearm.
Explains how to balance the tonearm and set tracking force for optimal sound.
Instructions for setting the anti-skate control to counteract inward stylus pull.
How to attach and detach the dust cover using hinge holders.
Guide to selecting cartridge type and pre-amplifier output.
Instructions for connecting the turntable to a computer via USB.
Steps for connecting the power adapter and initial use notes.
How to connect the turntable to external audio equipment via RCA cables.
Pre-play steps including removing the protector and placing the record.
Detailed procedure for starting and playing a record on the turntable.
How to pause playback and safely stop the turntable after use.
Cleaning instructions for the turntable body and long-term storage.
Advice on cleaning and maintaining the stylus tip for optimal performance.
Step-by-step guide to safely removing and installing a new stylus.
Steps to detach the stylus and the original cartridge from the headshell.
Instructions for mounting a new cartridge and adjusting its position.
Reattaching the headshell and re-adjusting tonearm balance and tracking force.
Instructions for safely packing and moving the turntable.
Solutions for platter not spinning, no sound, or low volume.
Troubleshooting for stylus skips, howling, noise, and speed inaccuracies.
Resolving humming noises and ensuring proper tonearm and ground connections.
To Next Page