21
Setting up your PC to work with Audacity
(See Setting up your PC to work with AT-LP2D-USB Turntable on page 4.)
NOTE: See page 4 for important instructions on how to setup your PC to work with
AT-LP2D-USB turntable before continuing.
1. Launch the Audacity program from your Start menu.
2. Select Preference from the Edit tab in the Audacity Menu.
3. Select Audio I/O tab at the top left.
• Under Playback, Device, select your internal sound card.
• Under Recording, Device, select USB Audio CODEC.
• Under Recording, Channels, select 2 (Stereo).
• Check the box marked Software Playthrough.
EN
To Next Page
Loading...
