EasyManuals Logo
Home>Audio Technica>Turntable>AT-LP2D-USB

Audio Technica AT-LP2D-USB User Manual

Audio Technica AT-LP2D-USB
31 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
Audio-Technica U.S., Inc., 1221 Commerce Drive, Stow, Ohio 44224 330/686-2600 www.audio-technica.com
P51983 ©2007 Audio-Technica U.S., Inc. Printed in China
Visit our Web Site: www.audio-technica.com
One-Year Limited Warranty
Audio-Technica brand products purchased in the U.S.A. are warranted for one year from date of purchase by Audio -Technica U.S., Inc. ( A.T.U.S.) to be
free of defects in materials and workmanship. In event of such defect, product will be repaired promptly without charge or, at our option, replaced
with a new product of equal or superior value if delivered to A.T.U.S. or an Authorized Service Center, prepaid, together with the sales slip or other
proof of purchase date.
Prior approval from A.T.U.S. is required for return. This warranty excludes defects due to normal wear, abuse, shipping
damage, or failure to use product in accordance with instructions. This warranty is void in the event of unauthorized repair or modification, or removal
or defacing of the product labeling.
For return approval and shipping information, contact the Service Dept., Audio-Technica U.S., Inc., 1221 Commerce Drive, Stow, Ohio 44224.
Except to the extent precluded by applicable state law, A.T.U.S. will have no liability for any consequential, incidental, or special damages; any
warranty of merchantability or fitness for particular purpose expires when this warranty expires.
This warranty gives you specific legal rights, and you may have other rights which vary from state to state.
Outside the U.S.A., please contact your local dealer for warranty details.
Specifications
Type Belt drive turntable, fully automatic
Platter Aluminum
Motor DC servo-controlled
Speeds 33
1
/
3
RPM, 45 RPM
Wow and flutter Less than 0.25% (WTD) @ 3K Hz (JIS)
Signal-to-noise ratio 50 dB
Cartridge Integral Dual Magnet
stereo cartridge
with diamond stylus
Output level
Pre-amp “PHONO” 2.5 mV nominal at 1 KHz, 5 cm/sec
Pre-amp “LINE” 200 mV nominal at 1 KHz, 5 cm/sec
Power 120V AC, 60 Hz, 3W
Dimensions 14.17" (360 mm) W x 3.82" (97 mm) H x
14.06" (357 mm) D
Net weight 6.6 lbs. (3.4 kg)
Furnished accessories Dual RCA (female) to
1
/
8
" (3.5 mm) mini-
plug (male) stereo adapter cable; dual
RCA (female) to
1
/
8
" (3.5 mm) mini-plug
(female) stereo adapter cable; USB cable;
45 RPM adapter
Replacement stylus ATN3600L
Tips For Better Performance
When opening or closing the turntable cover, handle it
gently, moving it either at the center or equally from
both sides.
Do not touch the stylus tip with your fingers; avoid
bumping the stylus on the turntable mat or a
record’s edge.
Clean the stylus tip frequently, using a soft brush
with
a
back-to-front motion only.
If you use a stylus cleaning fluid, use it very
sparingly.
Wipe the dust cover and turntable housing gently with
a soft cloth. Use only a small amount of mild detergent
solution to clean the turntable and dust cover.
Never apply harsh chemicals or solvents to any part of
the turntable system.
Prior to moving the turntable, always unplug it from the
AC outlet and fasten the tone arm on the tone arm rest
with the vinyl twist-tie.

Other manuals for Audio Technica AT-LP2D-USB

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Audio Technica AT-LP2D-USB and is the answer not in the manual?

Audio Technica AT-LP2D-USB Specifications

General IconGeneral
Player media type-
Total storage capacity0 GB
Compatible memory cardsNot supported
Audio formats supportedMP3, WAV, WMA
Voice recordingNo
Connectivity technologyWired
Compatible operating systemsWindows XP / Vista / Vista x64
Bundled softwareCakewalk
Product colorBlack
Minimum RAM1024 MB
Optical drive requiredYes
Minimum system requirementsCD-ROM USB
Continuous audio playback time- h
Weight and Dimensions IconWeight and Dimensions
Depth0 mm
Weight- g

Related product manuals