Audio Technica AT-LPW30BK User Manual

13
Specifications
Turntable specifications
Type Belt-drive manual turntable
Motor
DC servo
Drive method Belt drive
Speeds 33-1/3 RPM, 45 RPM
Turntable platter Aluminum Die Casting
Wow and flutter < 0.15 % WRMS (33 RPM) at 3 kHz
Signal-to-noise ratio > 60 dB
Output levels
“PHONO”
“LINE”
4.0 mV nominal at 1 kHz, 5 cm/sec
200 mV nominal at 1 kHz, 5 cm/sec
Phono Pre-amp gain 35 dB nominal, RIAA equalized
Tonearm specifications
Type
Static balanced straight aluminium
pipe tonearm
Effective length 223.6 mm
Overhang 18.6 mm
Maximum tracking error angle Less than 2.0°
Stylus pressure adjustment
range
0 to 3.0 g
Applicable cartridge weight
range (including headshell)
12 to 17 g
Cartridge and headshell specifications
Cartridge Model
AT-VM95C
Cartridge Type VM
Recommended load
impedance
47,000 ohms
Output voltage 4.0 mV (mV at 1 kHz, 5 cm/sec)
Stylus
0.6
mil bonded conical stylus
Cantilever Aluminum pipe
Tracking force range 1.8 to 2.2 g (standard 2.0 g)
Cartridge weight 6.1 g (0.22 oz)
Headshell model AT-HS4
Headshell weight 8.5 g (excluding lead wires)
Headshell overhang
adjustment
± 5 mm
General specifications
Power supply requirements 100 to 240 V, 50/60 Hz, 0.5 A Max.
Power consumption 110V 60Hz (US)
- Working: 1.1 W
- Motor off: 1.0 W
- Power off: 0.1 W
220V 50Hz (EU)
- Working: 1.2 W
- Motor off: 1.1 W
- Power Off: 0.2 W
AC Adapter 12 V, 0.5 A
Dimensions 420 mm (16.53") × 340 mm (13.38")
× 116.9 mm (4.6")
(W × D × H)
Weight (without dust cover)
3.90 kg (8.60 lbs)
Accessories included
Dust
cover, Platter, Turntable
mat, Drive belt, Counterweight,
Headshell (AT-HS4) with VM stereo
cartridge*, 45-RPM adapter, RCA
audio cable (Approx. 1.0 m (3.3')),
AC adapter (Approx. 1.5 m (4.9')),
Dust cover hinges
Replacement stylus (sold
separately)
AT-VMN95C
Replacement headshell (sold
separately)
AT-HS4
Replacement belt (sold
separately)
AT-LPW30 exclusive belt
* AT-VM95C Specifications are subject to change without
notice due to improvements.

Audio Technica AT-LPW30BK Specifications

General

Type	Belt-drive audio turntable
Operation	Manual
Output level	200 mV
Product color	Black
Wow & flutter	0.15 %
Nominal speeds	33 1/3, 45 RPM
Stylus pressure	3 g
Platter material	Aluminum
Pick-up arm length	223.6 mm
Signal-to-Noise Ratio (SNR)	60 dB
AC adapter frequency	50/60 Hz
AC adapter input voltage	100 - 240 V
Overhang	18.6 mm
Tracking angle	2 °
Quantity	1
45 rpm adapter	Yes
Package depth	488 mm
Package width	418 mm
Package height	192 mm
Package weight	5964 g
Country of origin	China

Weight and Dimensions

Depth	340 mm
Width	420 mm
Height	1169 mm
Weight	5000 g