Using the product
23
1
Remove the headphones from the charging case and place them in your ears.
Make sure the headphones are correctly oriented when placing them in your ears. For details, refer to "Notes
for talking on the phone" (p. 23).
2
Make/receive calls with your Bluetooth device.
When your Bluetooth device receives a phone call, the product sounds a ringtone.
If a call is received while you are listening to music, music playback is paused.
3
To receive a call, press the multifunction button on the L (left) or R (right) side headphone.
Calls can be answered from either the L (left) or R (right) side headphone.
4
Press the multifunction button on the L (left) side headphone once or twice in a row to adjust the volume
(up or down).
5
To end the call, press and hold (about 2 seconds) the multifunction button on the L (left) or R (right) side
headphone.
Calls can be ended from either the L (left) or R (right) side headphone.
If the call was received while listening to music, playback is resumed.
Music playback may not be resumed on some Bluetooth devices. In this case, music playback must be started
manually.
Making/receiving calls is also possible with only one headphone by removing only one side from the
charging case and putting it in your ear. When you use only one headphone, some functions are not available
depending on which side is worn. Use the Bluetooth device for operation in such cases.
Notes for talking on the phone
When talking on the phone, make sure the tips of the headphones (microphones) are angled toward your mouth as
shown in the figure. If the headphones are not oriented correctly, your voice may be too quiet for others to hear.
To Next Page
Loading...
