10
Using the product
The product can use Bluetooth wireless technology to connect to your device and play music, receive phone calls, etc.
Use the product for whichever of these purposes suits your needs.
Note that Audio-Technica cannot guarantee the operation of displays, such as the battery level display, or applications
via Bluetooth devices.
Power supply ON/OFF
Power supply Operation Indicator lamps
ON*
1
Remove from the
charging case.
Lights in white, then flashes in
white*
2
*
3
Press and hold (for
about 2 seconds)
OFF*
1
Place in the
charging case.
Lights in white, then turns off*
3
Press and hold (for
about 4 seconds)*
4
*1 If you are wearing the product, you will hear a beep to indicate when the product has turned on and off.
*2 It may take several seconds for the indicator lamp to light.
*3 For details, please refer to “About indicator lamps on the headphones” (p.14).
*4 When you turn off the R (right) side, the L (left) side also turns off automatically.
Wearing the product
Insert the side of the product marked "L" (LEFT) into the
left ear, and the side marked "R" (RIGHT) into the right ear
as shown in the figure.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
