11
Using the product
Using the 3D loop supports
This product includes 3D loop supports for stability through a better fit. To use the 3D loop supports, attach the
supports as follows.
1. Remove the silicone rings that come attached to the headphones.
• Use the notch to remove the ring with your finger.
Notch
Silicone ring
The left bushing has a
protrusion for distinguishing
between the left and right.
2. Attach the 3D loop supports to the headphones.
Align the protrusions on the
headphone with the notches in
the loop support
The left bushing
has a protrusion
for distinguishing
between the left
and right.
3. Wear the headphones.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
