BroadSoft SIP Trunk
Quick Guide 12 Document #: LTRT-14020
4. Click Load File; the device begins to install the .cmp file and a progress bar displays
the status of the loading process:
Figure 4-3: CMP File Loading Progress Bar
A message is displayed to inform you that the file has been loaded,.
5. When successfully loaded, click Next to access the wizard page for loading the ini file.
6. Clear the Use existing configuration option, click Browse to select the configuration
file (.ini) on your PC, and then click Load File to load the file:
Figure 4-4: Load an INI File in the Software Upgrade Wizard
7. Click Next to access the wizard page for loading the Call Progress Tones (CPT) file.
8. Click Browse to select the CPT file on your PC, and then click Load File to load the
file:
To Next Page
Loading...
