AudioCodes Mediant 500 - Page 21

Quick Guide 5. Configure Device
Version 7.2 21 AudioCodes Mediant Gateway
5.3.3 Configure Registration Parameters
This step shows how to configure the SIP Proxy and Registration parameters, including
configuring a Proxy Name, Registrar Name, Registration and Subscription modes.
 To configure the SIP Proxy & Registration parameters:
1. Open the SIP Proxy & Registration Parameters page (Setup menu > Signaling &
Media tab > SIP Definitions folder > Proxy & Registration).
2. Configure following parameters:
Parameter Value
Gateway Name
uk.ic.sipconnect.hipcom.co.uk
Use Gateway Name for OPTIONS
Yes
Use Default Proxy
Use Proxy
Proxy Name Per SIP Trunk requirement
Always Use Proxy
Enable
Gateway Authentication
User Name Trunk Group Pilot User
Password Trunk Group Pilot User Password
Authentication Mode
Per Gateway
Gateway Registration
Enable Registration
Enable
Registrar Name
uk.ic.sipconnect.hipcom.co.uk