AudioCodes Mediant 500L MSBR - Figure 5-19: Inserting Plug into Power Adapter; Table 5-6: Power Adapter with Interchangeable Plugs

Hardware Installation Manual 40 Document #: LTRT-10444
Mediant 500L MSBR
Table 5-6: Power Adapter with Interchangeable Plugs
Item Description
1
Plug slot
2
Plug lock
3
Plug release lever
4
DC power cord
5
DC power plug
 To connect the device to the power supply using the 3-Amp power adapter:
1. Insert the relevant AC plug into the housing power adapter:
a. Insert the top part of the plug into the upper part of the housing slot (1).
b. Press down on the bottom part of the plug until a "click" sound is heard, indicating
that the plug is securely inserted in the housing slot. To remove the plug, push
and slide down the OPEN plug release lever (3).
Figure 5-19: Inserting Plug into Power Adapter