AudioCodes MediaPack MP-114 Hardware Installation Manual

Analog Gateways 17 MP-11x
Hardware Installation Manual 4. Mounting MP-11x
4 Mounting MP-11x
The device can be mounted in one of the following ways:

Desktop mounting - see 'Desktop Mounting' on page 18

Wall mounting - see 'Wall Mounting' on page 18

Standard 19-inch rack mounting - see '19-inch Rack Mounting' on page 20
The figure below shows the mounting components on the underside of MP-11x:
Figure 4-1: MP-11x Underside
Table 4-1: Mounting Components on MP-11x Underside
Item # Description
1
Square slot used to attach anti-slide bumpers (for desktop mounting).
2
Screw opening used to attach MP-11x to a 19-inch shelf rack.
3
Keyholes for mounting MP-11x to a wall.

AudioCodes MediaPack MP-114 Specifications

General

Model	MP-114
Category	Gateway
Analog Ports	4 FXS
Network Interfaces	2 x 10/100Base-T Ethernet
Voice Codecs	G.711, G.726, G.723.1, G.729A/B
Fax Support	T.38
Management	Web-based management, CLI, SNMP
Security	SRTP, TLS, HTTPS
Ports	4 RJ-11, 2 RJ-45
Protocols	SIP, H.323
Operating Temperature	0°C to 40°C
Storage Temperature	-20°C to 70°C
Humidity	10% to 90%, non-condensing