Version 6.0 39 March 2010
Installation Manual 3. Configuring the Device
b. Press the #
c. Dial the new subnet mask (e.g., 255*255*0*0), and then press
key.
#
d. Review the new subnet mask, and then press
to finish.
1
6. To change the default Gateway IP address:
to save.
a. Press 3 followed by the #
b. Press the
key; The current default Gateway address is played.
#
c. Dial the new default Gateway address (e.g., 192*168*0*1), and then press
key.
#
d. Review the new default Gateway address, and then press
to
finish.
1
7. Hang up the handset.
to save.
8. Access the device's Web interface with the new IP address you assigned.
Alternatively, initial configuration may be performed using an HTTP server, as discussed in
the Product Reference Manual
To set a configuration URL:
('Automatic Update Facility'). The Voice Menu may be used
to specify the configuration URL.
1. Obtain the IP address of the configuration HTTP server (e.g., 36.44.0.6).
2. Connect a telephone to one of the FXS ports.
3. Lift the handset and dial ***12345
4. Wait for the 'configuration menu' voice prompt to be played.
(three stars followed by the digits 1, 2, 3, 4, and 5).
5. Dial 31 followed by the #
6. To change the IP address, perform the following:
key; the current IP address is played.
a. Press the #
b. Dial the configuration server's IP address. Use the star (*) key instead of dots ("."),
e.g., 36*44*0*6, and then press
key.
#
c. Review the configuration server's IP address, and then press
to finish.
1
7. Dial
to save.
32 followed by the #
a. Press the
key, and then perform the following to change the
configuration file name pattern:
#
b. Select one of the patterns listed in the table below (
key.
aa.bb.cc.dd
denotes the IP
address of the configuration server):
# Configuration File Name Pattern
1
Description
http://aa.bb.cc.dd/config.ini Standard config.ini.
2 https://aa.bb.cc.dd/config.ini Secure HTTP.
3 http://aa.bb.cc.dd/audiocodes/<MAC>.ini
The device's MAC address is appended to the file
name (e.g.,
http://36.44.0.6/audiocodes/00908f012300.ini).
4 http://aa.bb.cc.dd:8080/config.ini HTTP on port 8080.
5 http://aa.bb.cc.dd:1400/config.ini HTTP on port 1400.
6
http://aa.bb.cc.dd/cgi-
bin/acconfig.cgi?mac=<MAC>&ip=<IP>
Generating configuration per IP/MAC address
dynamically, using a CGI script. See perl example
below.
To Next Page
Loading...
Need help?
General
