OPERATING INSTRUCTIONS
Power On / Off
Press the /SRC button on the front panel to turn the unit on.
Press and hold the
/SRC button on the front panel to power off the unit.
Audible Beep Conrmation
An audible beep tone conrms each function selection. The Beep tone can be
disabled through the Setup menu.
Mute
Press the rotary encoder MUTE button on the front panel to mute the volume. The
mute symbol is displayed on the TFT screen.
Press the rotary encoder button again to restore the volume. Adjusting the volume or
using any of the audio setup features cancels the mute function.
If the “MUTE” wire is connected, audio output mutes when a telephone call is
received by a mobile phone.
Playing Source Selection
Source Menu
Source Menu Page 1
Source Menu Page 2
You can use the touch screen to change the source through the SOURCE MENU. To
access the SOURCE MENU, touch the top left corner of the screen or press the SRC
button. The SOURCE MENU consists of two pages. Touch NEXT or PREVIOUS to go
from one page to another. Touch the DISC, RADIO, USB, USB2, SD, BLUETOOTH
(BT), NAV, AUXIN, CAMERA or SETTINGS to select the corresponding source.
NOTE: If an iPod® is attached to the USB port, “iPOD” appears instead of the
text “USB.”
73
To Next Page
Loading...
Need help?
General
