Using Preset Stations
Six numbered preset buttons store and recall stations for each band. All six stored
stations (P1 - P6) for the current band appear on the screen.
Storing a Station
1. Select a band (if needed), then select a station.
2. Touch the on-screen Mem icon to access the preset screen.
3. Touch the preset number in which you would like to store the current station (or
touch X to cancel and close the menu). The station frequency is displayed at the
top of the menu. The preset number will appear highlighted. The station frequency
will be stored in the highlighted preset. The station will be displayed on the front
panel of the tuner screen.
Recalling a Station
1. Select a band (if needed).
2. Touch an on-screen preset button to select the corresponding stored station.
90
To Next Page
Loading...
Need help?
General
