Hardware Sub-menu Features
If the rear-view video camera is connected, the unit is on, and the TFT monitor
is retracted inside the unit, the TFT monitor automatically moves into the viewing
position and Camera mode is selected upon shifting into REVERSE gear. When
shifting into DRIVE gear, the TFT monitor is retracted back inside unit.
Setting Options Function
Color Select White This feature allows the user to select eight
pre-dened LED colors for the front panel
button illumination.
Red
Blue
Green
Yellow
Purple
AquaBlue
SkyBlue
Custom
Color Scan On The unit will “scan” the color spectrum to
allow the user to select a color.
Off
Color Custom Red This feature allows the user to tune the
RGB colors of the LEDs to obtain an exact
match for their vehicle.
Green
Blue
Camera In Normal Reverse the camera image as if looking
through a rear-view mirror.
Mirror
Video Input (Input circuitry
auto detects the video
signal from the Aux In
source).
NTSC The color signals are output in the
standard NTSC format.
PAL The color signals are output in the
standard PAL format.
Auto The color signal output is switched
automatically based on the current video
input signal - NTSC or PAL.
84
To Next Page
Loading...
Need help?
General
