Audison bit Ten D User Manual

ADVANCED MANUAL / bit Ten D /
30
The following chapters detail the system adjustments and acoustic tuning features.
WARNING: We recommend that you do not modify the settings of your bit Ten D to explore its features.
Take your time to get familiar with the possibilities this software offers.
If you decide to leave the amplifiers connected to the bit Ten D, remember to perform the adjustments keeping
the general volume at a level that does not damage the speakers in your system.
This window indicates whether the bit Ten D is correctly connected to the PC and the DRC. It also shows the device
Firmware version.
Clicking the File tab, a drop-down menu appears
with the entries shown in the image:
1.
Load Setup: the entire bit Ten D configuration is loaded from a
previously saved file (e.g. “bitTenConfig.dip”).
This feature is available both in TARGET and in OFFLINE mode.
In TARGET mode, this lets you load all the settings that have
been previously saved. This is useful if you want to
resume all the settings you previously selected to install
another bit Ten D with the same settings.
Output levels calibration and de-equalization, if any, must be repeated.
In OFFLINE mode, this lets you view the features you previously saved.
8.3 ADJUSTING ACOUSTIC REPRODUCTION
8
8.4 DEVICE INFO
1
8.5 “FILE” MAIN MENU
2
1
2
8
3
5
9
4
11
6
7
10
1
2
3
4
5
6
7
8
9
10

Audison bit Ten D Specifications

General

Brand	Audison
Model	bit Ten D
Category	Computer Hardware
Language	English