Audison bit Ten D User Manual

ADVANCED MANUAL / bit Ten D /
43
7. Before starting the bit Ten D update, the software will present the following warnings:
- do not disconnect the bit Ten D from the PC;
- do not disconnect the bit Ten D from power supply;
- temporarily disable the PC stand-by and energy saving features;
- temporarily disable the PC screen saver;
- close all running applications;
- temporarily disable anti-virus and anti-spyware systems.
8. Once you have clicked OK, the Firmware update starts. The updating
process will last from 30 seconds to 1 minute with the green progress
bar showing correct advancement.
WARNING: During the updating process the progress bar could stop
for few seconds. Do not interrupt the process in any way.
.
9. Once the update has been successfully completed, the window on the
right will appear. To use the bit Ten D again, you have to exit the PC software
and the bit Ten D will turn off.
10.
Start the bit Ten D again and launch the PC software in TARGET mode.
If the bit Ten D firmware update has completed correctly, the dialog
box will show the following indications:
- new bit Ten D firmware version.
11.
Repeat the bit Ten D calibration procedure ( see 7.1 - 8.1) .
9

Audison bit Ten D Specifications

General

Brand	Audison
Model	bit Ten D
Category	Computer Hardware
Language	English