38
INSTALLATION
CAUTION
For the system safer protection, we
recommend the use of a strip fuse on
the cable that connects the battery
positive pole to the amplifier POWER
(+) terminal block.This fuse has to be
installed about 10 cm far from the
battery; its value will have to be
equal or slightly higher (+10%
approx.) than consumption @13.8
VDC, according to the different
configurations (see “Technical
features”).
It will have to be equal to the sum of
the values of all fuses in case system
consists of several amplifiers or in
case amplifiers have several fuses.
AMPLIFIER FIXING
COLLEGAMENTI ELETTRICI
LRx 6.SR Direct FUSE: 60A
To Next Page
Loading...
