AUMA ACE C 01.2 Profinet Series - Page 67

ExplanationSetting valueDefaultAc-
cess
ParametersTypeID
Minimum temperature of con-
trols
Min = –100 [°C]R
Min. temp. controls
I324761PRM
Max = +150 [°C]
Maximum temperature of MWG
Min = –100 [°C]R
Max. temp. MWG
I324760PRM
Max = +150 [°C]
Minimum temperature of MWG
Min = –100 [°C]R
Min. temp. MWG
I324764PRM
Max = +150 [°C]
Maximum actuator vibration
Min = –100 [°C]R
Max. vibration
I325061PRM
Max = +150 [°C]
Value = 1:Deleting operating
data
R/W
Reset operating data
I163484PRM
Table 84: Asset Management > Event report
ExplanationSetting valueDefaultAccessParametersTypeID
Data length = 10 bytes
File size = number of events to
be recorded x 56/1024 kBytes
Min = 0548R
File size event. rep.
U16185PRM
Max = 1024
Save interval for event data from
buffer
Min = 100050000R
Save interval
U16186PRM
Max = 65535
Max. number of events in the
buffer
Min = 1050R
Buffer size
U16187PRM
Max = 100
The event filter for System
defines which system events are
to be recorded into the event
report.
0: Commands
31R
System event filter
enum189PRM
1: Parameterization
2: Enable processes
3: System events
4: Simulation
67
Actuator controls
AC 01.2/ACExC 01.2 Profinet Appendix