AUMA ACE C 01.2 Profinet Series - Page 71

ExplanationSetting valueDefaultAccessParametersTypeID
FQM (fail safe) is initialised
(constant force spring is being
wound).
Min = 0R
FQM init.
BOOL1627PZD
Max = 1
FQM fail safe fault active
Min = 0R
FQM fail safe fault
BOOL1628PZD
Max = 1
FQM unit is ready to execute a
fail safe operation
Min = 0R
FQM FS ready
BOOL1593PZD
Max = 1
The diagnostic result of winding
and blinker contact is indicated
as faulty
Min = 0R
FQM FS diag. result
BOOL1595PZD
Max = 1
FQM fail safe position OPEN
reached
Min = 0R
FQM end pos. open
BOOL1629PZD
Max = 1
FQM fail safe position CLOSED
reached
Min = 0R
FQM end pos. closed
BOOL1630PZD
Max = 1
Fail safe function of FQM (fail
safe) is requested. (ESD reques-
ted).
Min = 0R
FQM FS-ESD request
BOOL1598PZD
Max = 1
FQM collective signal active
aus:
FQM FS-Diag Result
FQM Timeout Tension
FQM Timeout Limit
FQM Timeout Motor
FQM Fault Temperature or
voltage monitoring
FQM Fail safe fault
Min = 0R
FQM collective fault
BOOL108PZD
Max = 1
FQM time exceeded for end po-
sition operation (limit) and/or
winding procedure (tension)
Min = 0R
FQM timeout
BOOL1771PZD
Max = 1
71
Actuator controls
AC 01.2/ACExC 01.2 Profinet Appendix