AUMA PROFOX PF-Q80 - Table of Contents

Read operation instructions first.
●
Observe safety instructions.
●
These operation instructions are part of the product.
●
Store operation instructions during product life.
●
Pass on instructions to any subsequent user or owner of the product.
Target group:
This document contains information for assembly, commissioning and maintenance staff.
Table of contents Page
41. Safety instructions.................................................................................................................
41.1. Prerequisites for the safe handling of the product
41.2. Range of application
51.3. Warnings and notes
51.4. References and symbols
72. Short description...................................................................................................................
93. Name plate..............................................................................................................................
114. Transport and storage...........................................................................................................
114.1. Transport
114.2. Storage
125. Assembly................................................................................................................................
125.1. Mounting position
125.2. Fit ball handle to handwheel
125.3. Mount actuator to valve
125.3.1. Overview on coupling variants
135.3.2. Mount actuator (with coupling)
166. Electrical connection.............................................................................................................
166.1. Basic information
176.2. Open terminal compartment
186.3. Cable connection
216.4. Close terminal compartment
216.5. External earth connection
237. Commissioning......................................................................................................................
237.1. End stops in part-turn actuator
247.1.1. Set end stop CLOSED
257.1.2. Set end stop OPEN
257.2. End position setting (via push buttons)
267.2.1. Set end position CLOSED
277.2.2. Set end position OPEN
287.3. Position indicator setting
297.3.1. Position indication for 90°
307.3.2. Position indication for 120°
307.3.3. Position indication for 45° – 360°
317.4. Configuration of further parameters
317.4.1. Speed setting
2
PF-Q80 – PF-Q600
Table of contents