AUMA SQ 07.2 User Manual

The motor has to cool down before operation can be resumed.
Depending on the parameter setting (motor protection behaviour), the fault signal is
either automatically reset or the fault signal has to be acknowledged.
The acknowledgement is made:
●
in selector switch position Local control (LOCAL) via push button RESET.
●
In selector switch position Remote control (REMOTE) with Reset command
via fieldbus.
72
SQ 05.2 – SQ 14.2 / SQR 05.2 – SQR 14.2 Control unit - electromechanical
Corrective action AC 01.2 Intrusive Modbus RTU

AUMA SQ 07.2 Specifications

General

Brand	AUMA
Model	SQ 07.2
Category	Controller
Language	English